Thank you for helping us by reporting bad content.
What you need::
-plain white t-shirt (or black, or any colour of your choice)
-leopard print fabric (look in charity shops for a leopard skirt or something)
-bondaweb (you can get this from any craft/sewing shop)
O1. I didnt like the collar/sleeves/hem on my t-shirt, so I altered them buy cutting them to my liking. You can do this however you want!
O2. Put your t-shirt aside. Get your leopard print fabric, and draw on a cross. You can print off a template or just draw freehand, its up to you. If you fold the fabric, you can just draw half of the cross, cut it out and it will be symmetrical on both sides of the cross.
O3. Place your cross under the bondaweb with the right side facing down and the rough side of the bondaweb facing down onto the cross, and draw round it with a pen/pencil, just do a few dotted lines so you know where to cut. Remove the cross and cut out the bondaweb, it should be a perfect fit to your cross. The bit sticking out on my cross, I used the gap above the other side of the bondaweb for that bit, so avoid wasting any.
O4. Go to your ironing board, and place the rough/sticky side of the bondaweb on top of the back of the cross. Iron them together, go over it a few times to make sure that its really stuck down.
O5. Wait 30 seconds then peel off the paper backing of the bondaweb, and you should be left with a rough surface on the back of your cross.
O6. Give your t-shirt a quick iron so it is a nice flat surface, then place the cross onto the t-shirt right side up. Position it where you want it, then iron it down.
O7. Tadaaaaaaaaaaaaa! Its basically the same as the real thing.
**follow along with the pictures for help!